Gerai Produk

Bomb Calorimeter with Digital Differential Temperature ( DDT) / Firing Unit ( FU) provides an accurate, simple & inexpensive method for determination of Heat of Combustion, Calorific Values & Sulphur contents of solid & liquid fuels.
The Digital Differential Temperature / Firing Unit with Electronic Timer Beep is having following features:
Temperature Indication : 3 ½ Digit - Digital Display
Differential Temperature Range : 0 - 10º C
Reading Accuracy of Temperature : 0.01º C
Firing Voltage for Bomb : 12 V AC
LED Indication for filament continuity
LED Indication for Bomb Calorimeter Combustion

Bomb body machined from corrosion-resistance stainless steel alloy
Each bomb tested at a pressure of 300 kg/ cm² or 10 minutes
Offset stirrer precluded heat from motor to calorimeter vessel
Easy to handle and operate

Bomb Calorimeter Model KMCC01M2 is supplied with:
1.Combustion bomb
2. Calorimeter with Bomb support
3.Combined lid for calorimeter Vessel & jacket
4. Water Jacket
5. Stirrer
6. Connecting leads
7. Copper connecting tube to connect the fine adjustment Valve with pressure gauge to Oxygen cylinder ( Oxygen Cylinder is not supplied by us)
8. Adjustable spanner
9. Ignition wire ( 20 Meters) Nichrome ( 36 SWG)
10. Cotton Reel
11. Stand for Bomb lid
12.Hook for lifting Bomb
13.Crucible-2 nos. ( SS)
14. Gelatin Capsule 50 nos.
15. O – rings for Bomb & Stirrer ( one set each)
16. Instruction Manual
17. Valve for Bomb
18. Valve Key
19. Benzoic Acid ( 10 tablets)
20. Pellet press
21. Platinum wire ( optional at extra cost)
22. Gas Releasing Valve
Special features of our system:
a. Our water calorimeter is filled with highly insulated special material to avoid any temperature radiation and hence no temperature correction is required.
b. SOFTWARE: Our Digital Differential Temperature/ Firing unit is provided with RS 232C Interface so that you can connect this unit with computer using software ( COMPUTER at an extra cost) to get AUTOMATIC CALCULATION of Calorific value.

ANNEXURE – A
Features of Software:

1. Setting of timer from 0 – 300 sec. for Initial temperature stability
2.Memory Storage ( All data will be stored in computer)
3.Display / printing of temperature readings / calorific value in all experiments
4.Software will Automatically detect the maximum rise in temperature
5.Automatic Calculation of calorific value in K.cal/ Kg. ( Conversion to Btu / lb)
6.Printing of water equivalent / calorific value format for every experiment.
7.Report for individual experiment ( One complete experiment includes water equivalent , calorific value etc.)
8.Printing and saving of Report for one / all experiments.
9.Printing and review of experimental results with specific selection of sample / analyst / date etc. on weekly / fortnightly / monthly or as per required time period .
10.Deletion of any data as & when required.
11.Automatic corrections of calorific value for Fuse wire , Cotton thread and optional for Nitric Acid & others.

Multron Top
Jalan Mulia IV Blok M-X
No. 9 Cipondoh Makmur
Tel. 021-26237478
Fax. 021-5544863
E-mail ; [email protected]
Http://www.alatlaboratorium.org