Goot BS-2
Goot BS-2
When the tip surface starts to oxidize during operation, it becomes dark and does not wet properly. To improve work efficiency, use the Tip Refresher.
HOW TO USE
1.Optimum tip temperature for refreshing the tip is from 300-360°C.
2.Dip the tip in the Tip Refresher.
3.Apply solder to the tip and then clean completely with the sponge on the soldering iron stand (goot ST series).
4.Apply solder to the tip again. The tip is now tinned and wetting is restored. If the tip is still not wetting properly, repeat steps 2 and 3 above.
Specifications :
Model : BS-2
Item : Tip Refresher
Composition : Ammonium phospate, Tin powder
NET Content : 9g
Berhati-hatilah dalam bertransaksi, pastikan anda membaca Tips Aman Berbelanja sebelum bertransaksi.






