alat ukur digital

Hioki 3805-50 Digital HiTester

chris — Tue, 12 May 2009 04:17:34 +0000

Hioki 3805-50 Digital HiTester

Features :
Demonstrate the Power of your DMM during Facilities Maintenance
* For Instrumentation (4 - 20mA% display)
* For Power line distortion check (Harmonic distortion % display)
* True RMS rectification of your harmonic-ridden signal, Basic accuracy ±0.09%
* For cooling equipment maintenance (Simultaneous 2-point temperature measurement)
* New ! Temperature scanning function (T1, T2, T1 - T2)
* New ! PC communication via USB or RS-232C (using optional accessories)

Specifications :
Basic specifications (Accuracy guaranteed for 1 year)
DC Voltage : 999.9mV to 999.9V, 4 ranges (Basic accuracy: ±0.09% rdg. ±2dgt.)
AC Voltage 40 to 2kHz : 999.9mV to 999.9V, 4 ranges
(Basic accuracy: ±1% rdg. ±5dgt. /true RMS rectified, crest factor 3 or less)
Resistance : 999.9Ω to 99.99MΩ, 6 ranges (Basic accuracy: ±0.3% rdg. ±3dgt.)
DC Current : 999.9μA to 9.99A, 5 ranges (Basic accuracy: ±0.1% rdg. ±3dgt.)
AC Current 40 to 2kHz : 999.9μA to 9.99A, 5 ranges (Basic accuracy: ±1% rdg. ±5dgt. /true RMS rectified, crest factor 3 or less)
Hz (Frequency) : 9.999Hz to 999.9kHz
(Accuracy: ±0.03% rdg. ±3dgt./Input level: 0.5V to 1000V, minimum frequency 0.5Hz)
Temperature (Thermocouple) : [K] -40°C to 1372°C, [J] -40°C to 1200°C
(Basic accuracy: ±0.3% rdg. ±3°C/add to the accuracy of the temperature probe)
Contact check : Buzzer sounds at a resistance equivalent to or less than 100 counts for each range
Diode check : Open-terminal voltage: less than 3.5V, Measurement current 0.46mA
Capacitance : 9.999μF (resolution 1nF) to 9.999mF (resolution 1μF), 4 ranges (Basic accuracy: ±2% rdg. ±5dgt.)
Other functions : Recording value of maximum, minimum, averaging, Trigger-hold, Refresh-hold, Harmonic %, 4-20mA % , Relative value, Auto-power save, RS-232C/USB communication
Display : Digital LCD, max. 9999 digit
Sampling rate : 7 times/s, 4 times/s (at capacitance measurement up to 100 μF), 1 time/s (at frequency measurement range)
Power consumption : 6F22 (Stacked manganese battery) × 1, Continuous use: 30 hr
6LR61 (Stacked alkaline battery) × 1, Continuous use: 60 hr
Dimensions, mass : 83mm (3.27 in) W × 178mm (7.01 in) H × 58mm (2.28 in) D, 400g (14.1 oz) (with holster and battery)
Supplied accessories : Test Lead 3851-10 × 1, Holster × 1, Battery (6LR61) × 1 (for trial purposes only)

hioki-3805-50.jpg

Hioki 3257-50 / 3257-51 Digital HiTester

chris — Tue, 12 May 2009 04:06:56 +0000

Hioki 3257-50 Digital HiTester

Features :
Terminal shutter interlock mechanism for safety
* Duty ratio measurement for pulse signal analysis
* Overload protect up to 1000V for all measurement functions

Specifications :
Basic specifications (Accuracy guaranteed for 1 year)
DC Voltage : 420.0mV to 1000V, 5 ranges (Basic accuracy: ±0.5% rdg. ±2dgt.)
AC Voltage 50 to 500Hz : 420.0mV to 1000V, 5 ranges (Basic accuracy: ±1.2% rdg. ±3dgt. /true RMS rectified, crest factor 3 or less)
Resistance : 420.0Ω to 42.00MΩ, 6 ranges (Basic accuracy: ±0.7% rdg. ±2dgt.)
DC Current : 42.00μA to 420.0mA, 10A, 6 ranges (Basic accuracy: ±1.5% rdg. ±4dgt.)
AC Current 50 to 500Hz : 42.00μA to 420.0mA, 10A, 6 ranges (Basic accuracy: ±2.5% rdg. ±5dgt. /true RMS rectified, crest factor 3 or less)
Hz (Frequency) : 199.99Hz to 500.0kHz (Basic accuracy: ±0.02% rdg. ±1dgt./Input level: 0.8V to 1000V 4 ranges, minimum frequency 0.50Hz)
Duty ratio measurement : 5 to 95%, Frequency range: 10Hz to 10kHz, (Basic accuracy: ±1.0% rdg. ±15dgt.)
Continuity : Buzzer sounds at a resistance equivalent to or less than 50Ω ±30Ω (Open-terminal voltage 3.4V, Diode check possible)
Other functions : Relative value, Memory function, Auto-power save, Hold-auto function, Recording value of maximum, minimum, averaging
Display : Digital LCD, max. 4200 digit, (at frequency 19999 dgt.)
42 segments Bar graph display
Sampling rate : 2.5 times/sec (excluding frequency function), 5 times/sec (at frequency function 5Hz or more), 25 times/sec (bar graph)
Power consumption : AAA manganese (R03) battery × 2, Continuous use: 100 hr
AAA alkaline (LR03) battery × 2, Continuous use: 200 hr
Dimensions, mass : 76mm (2.99 in) W × 167mm (6.57 in) H × 33mm (1.30 in) D, 260g (9.2 oz)
Supplied accessories : TEST LEAD 9207-10 × 1, AAA manganese battery (R03) × 2 (for trial purposes only),
3257-50 only : CARRYING CASE 9378 × 1, 3257-51 only : Holster × 1

hioki-3257-50.jpg

Kyoritsu 1009 Digital Multimeter

chris — Mon, 06 Apr 2009 15:10:20 +0000

Kyoritsu 1009 Digital Multimeter

Features :
• Display : 4000 counts.
• Auto range and manual range selector provided (with range hold feature).
• Diode test feature.
• Capacitance test feature.
• Relative measurement.
• Resistance range provides audible continuity test.
• Automatically turns power off in about 30 minutes to conserve battery life.
• Direct current measurement up to 10A AC and DC.
• With Holster.
• Designed to international safety standard IEC 61010-1 CAT.III 300V.

kyoritsu-1009.jpg

Kyoritsu 1030 Pen Digital Multimeter

chris — Mon, 06 Apr 2009 15:02:24 +0000

Kyoritsu 1030 Pen Digital Multimeter

Features :
• Compact in Size, Light in Weight and Simple in Use.
• Double moulding provides comfortable and good feeling in hand.
• Penlight illuminates brightly the point to be measured, even in dark place.
• Backlight LCD is highly visible, even in darkness.
• Auto power-off function saves the battery life.
• Unique wrapping mechanism for test lead in the rear side compartment.
• Unique protection mechanism for the test prod for safety.
• All ranges including Ohm range are protected against overload voltage of 600V.
• Designed in conformity with International safety standards IEC61010-1:2001 CAT.III 600V.

kyoritsu-1030.jpg

Kyoritsu KEW MATE 2001 Digital Multimeter

chris — Mon, 06 Apr 2009 14:58:49 +0000

Kyoritsu KEW MATE 2001 Digital Multimeter

Features :
• Capable of measuring AC and DC currents up to 100A with OPEN CLAMP SENSOR.
• 3400 counts with bargraph display.
• Pocket size and heavy duty design.
• Sleep function to save battery consumption.
• Designed to international safety standard IEC61010-1 CAT.III 300V

kewmate-2001.jpg

Kyoritsu KEW MATE 2000 Digital Multimeter

chris — Mon, 06 Apr 2009 14:56:13 +0000

Kyoritsu KEW MATE 2000 Digital Multimeter

Features :
• Capable of measuring AC and DC currents up to 60A with OPEN CLAMP SENSOR.
• 3400 counts with bargraph display.
• Pocket size and heavy duty design.
• Sleep function to save battery consumption.
• Designed to international safety standard IEC 61010-1 CAT.III 300V

kewmate-2000.jpg

Kyoritsu KEW 1011 Digital Multimeter

chris — Mon, 06 Apr 2009 14:41:11 +0000

Kyoritsu KEW 1011 Digital Multimeter

Features :
• Temperature measurement, selectable for ºC and ºF
• 6040 counts with Bar Graph display
• MIN/MAX function enables to record min & max value
• REL(relative value) function to indicate the measurement variation
• DUTY function
• Data Hold function, Auto Power Off function
• Continuity with buzzer and Diode Check function
• Capacity measurement of capacitors
• Current ranges are protected by fuses
• Designed to meet international safety standards
IEC 61010-1 CAT.III 300V / CAT.II 600V

kyoritsu-1011.jpg

Kyoritsu KEW 1012 Digital Multimeter

chris — Mon, 06 Apr 2009 14:36:24 +0000

Kyoritsu KEW 1012 Digital Multimeter

Features :
• True RMS can measure and indicate distorted waveforms
• 6040 counts with Bar Graph display
• MIN/MAX function enables to record min & max value
• REL(relative value) function to indicate the measurement variation
• DUTY function
• Data Hold function, Auto Power Off function
• Continuity with buzzer and Diode Check function
• Capacity measurement of capacitors
• Current ranges are protected by fuses
• Designed to meet international safety standards
IEC61010-1 CAT.III 300V / CAT.II 600V

kyoritsu-1012.jpg

Kyoritsu KEW 1061/1062 Digital Multimeter

chris — Mon, 06 Apr 2009 14:31:58 +0000

Kyoritsu KEW 1061/1062 Digital Multimeter

High Preformance Handheld DMMs
• High Accuracy, High Performance and Reliable Measurements
• Safety design for industrial use
• Reliable support for data management

Features :
High Accuracy, High Performance and Reliable Measurements
• 0.02% basic DC accuracy
• Large display with 50,000 counts
• Dual display for double indication for AC and DC, V and Hz, etc.
• True-RMS Measurements AC and AC+DC
• Wide AC Frequency bandwidth from 10Hz to 100kHz *
• True-RMS or MEAN value detection mode can be selected *
• Fast Peak Hold response time of 250µs
• Low-pass filter for motor drive measurements *
• Low Power Ω for resistance measurements on sensible electronic circuits by a low and safe test current *

Safety design for industrial use
• Complies with IEC 61010-1 CAT.III 1000V, CAT.IV 600V
• Terminal shutter to prevent incorrect test leads' insertion in current terminals
• Very wide operating temperature range from -20 to 55ºC

Reliable support for data management
• Large data internal memory
KEW 1062: 10,000 data (logging), 100 data (manual)
KEW 1061: 1,000 data (logging), 100 data (manual)
• Download data and Live Monitoring on a PC via the USB interface
(Option for USB Communication set)
• User calibration function
* Only for KEW 1062

kyoritsu-1061-1062.jpg

Kyoritsu KEW 1051/1052 Digital Multimeter

chris — Mon, 06 Apr 2009 14:19:32 +0000

Kyoritsu KEW 1051/1052 Digital Multimeter

For Electrical and Electronic Troubleshootings
• High Accuracy, High Performance and Reliable Measurements
• Safety design for industrial use
• Reliable support for data management (Only for KEW 1052)

Features :
High Accuracy, High Performance and Reliable Measurements
• 0.09% basic DC accuracy
• Large display with 6,000 counts
• True-RMS Measurements
• True-RMS or MEAN value detection mode can be selected *
• Low-pass filter for motor drive measurements
• User calibration function

Safety design for industrial use
• Complies with IEC 61010-1 CAT.IV 600V, CAT.III 1000V
• Terminal shutter to prevent incorrect test leads' insertion in current terminals
• Very wide operating temperature range from -10 to 55ºC

Reliable support for data management *
• Large data internal memory *
KEW 1052: 1,600 data (logging), 100 data (manual)
• Download data and Live Monitoring on a PC via the USB interface
(Option for USB Communication set) *
* Only for KEW 1052

kyoritsu-1051-1052.jpg

Fluke 114 Electrical Digital Multimeter

chris — Tue, 31 Mar 2009 16:43:43 +0000

Fluke 114 Electrical Digital Multimeter

Designed by electricians. Engineered by Fluke.
Compact true-rms meter for electrical troubleshooting. The Fluke 114 is the troubleshooting tool for “go/no-go” testing. It includes a feature to prevent false readings caused by ghost voltage.

Also check out the Fluke 115 Multimeter, the Fluke 116 HVAC Multimeter with Temperature and Microamps, and the Fluke 117, the Electrician’s Multimeter with Non-contact voltage.

Features :
* AutoVolt: automatic ac/dc voltage selection
* Large white LED backlight to work in poorly lit areas
* Resistance and continuity
* Min/Max/Average to record signal fluctuations
* CAT III 600 V safety rated

Safety conformance
All inputs are protected to CE, IEN61010-1 CAT III 600V. UL, CSA, TÜV listed and VDE.

fluke-114.jpg

Fluke 170 Series Digital Multimeters

chris — Tue, 31 Mar 2009 15:58:58 +0000

Fluke 170 Series Digital Multimeters

Setting the new multimeter standard
The three models of the new 170 Series are the new benchmarks for general purpose multimeters. They set the standard with a combination of precision, features, ease-of-use, safety and reliability.

Features :
* True RMS voltage and current measurements
* 0.09% basic accuracy (177, 179)
* 6000 count resolution
* Digital display with analog bargraph and backlight (177, 179)
* Manual and automatic ranging
* Display Hold and Auto Hold
* Frequency and capacitance measurements
* Resistance, continuity and diode measurements
* Temperature measurements (179)
* Min-max-average recording
* Smoothing mode allows filtering of rapidly changing inputs
* Easy battery exchange without opening the case
* Closed case calibration through front panel
* Ergonomic case with integrated protective holster
* EN61010-1 CAT III 1000V / CAT IV 600V
* Measures twice as fast as other multimeters

Safety conformance
All inputs are protected to IEN61010-1 CAT IV 600V/CAT III 1000V. UL, CSA, TÜV listed and VDE Pending

fluke-175.jpg

fluke-177.jpg

fluke-179.jpg

Sanwa PS8a Digital Pocket Solar Battery Multimeter

chris — Wed, 24 Dec 2008 06:19:19 +0000

Sanwa PS8a Digital Pocket Solar Battery Multimeter
-3-3 / 4 digits 4000 count
-0.7% best accuracy
-Range hold
-Auto power off (15min)
-Low power ohm (input voltage 0.4V)
-Power saving design

PS8a.jpg

Sanwa PM10 Digital Multimeter

chris — Wed, 24 Dec 2008 06:14:15 +0000

Sanwa PM10 Digital Multimeter
-3-3/4 digits 3200 count
-Compact size test leads affixed to the body
-Probes can be snapped into a fixed position atop the case.
-Full auto range arc. bargraph

PM10.jpg

Sanwa PC20 Digital Multimeter (PC Link System)

chris — Wed, 24 Dec 2008 06:09:22 +0000

Sanwa PC20 Digital Multimeter
-3-3/4 digits 4000 count
-Data-hold function
-Range-hold function
-Capacitance measurement
-Safety cover for the 10A terminal to avoid miss-insertion
-Holster (for wall hanging and fixing test leads)
-Tilt stand

PC20.jpg